Oak Calm White

Prices start at £80.90/ m² + Vat

Oak Calm White

This pale white oiled oak has a subtle white pigment in the grain and a brushed finish, and will give a light and airy finish to airy room.

We can supply the recommended adhesive to ensure the floor performs at its best when installed over a heated substrate.

  1. Request a sample

    Click here to order your free sample. Please note there is a limit of three samples per request. If you require more samples please call or email us.

    Request Sample
  2. Compare this floor

    Click here to send this floor to a comparison chart to ensure it is available in your desired specification.

    Compare

Specifications

See below an extract of technical specifications for Oak Calm White. Please contact us anytime if you do have further questions or download the full technical sheet for more information.

  • Species

    Oak
  • Origin

    Europe (Germany)

  • Shade

    Light / White tones
  • Sizes & Patterns

    Boards / Herringbone / Chevron
    Boards

    Width: 160, 195, 245, 260, 300 (mm)
    Lengths: Boards up to 245mm wide in standard length of 2.0m, 2.2m and 2.4m/ Boards in 260mm and 300mm width are produced in 3.65m and 4.2m lengths (subject to availability of raw materials)

    Herringbone

    Currently unavailable

    Chevron

    Currently unavailable

  • Thickness

    11mm (up to 195mm width), 15mm (up to 245mm width), 17mm (260mm and 300mm wide boards)

  • Wear Layer

    +/- 4mm on all oak floors in 11mm, 15mm and 17mm depth
    The veneers are cut so the grain/figure is in the centre of the board

  • Grades

    Rustic / Rustic A / Premier
    Rustic

    Large and frequent knots including large filled knots become a feature of the overall look. Rustic grade allows for a wide range of variation in colour and grain. This grade may contain:

    • Knots up to 80 mm
    • Cracks up to 400 mm
    • Sapwood up to 25 mm
    • End cracks up to 150 mm
    • Centre core
    • Natural colour variation
    Rustic A

    Rustic A or Classic grade allows a more pronounced variation in colour and grain. The floor contains knots including filled knots. This grade may contain the following:

    • Knots up to 40 mm
    • Cracks up to 20 mm
    • Filling in a sympathetic style
    • Natural colour variation
    • Sapwood up to 10 mm
    Premier

    Prime grade has an even appearance with possibly only occasional small knots and blemishes. The natural variation is limited, though can be more visible on fumed oak. This grade may contain the following:

    • Knots up to 15 mm
    • Small cracks up to 20 mm
    • Natural colour variation

    Very wide boards (260mm and 300mm) are only available in classic and rustic grade. Rustic grade boards do not contain sapwood.

  • Bevelled Edge

    Boards up to 245mm width are produced with a tiny micro bevel (0.5mm).
    Wider boards are produced with a V-bevel on the long side and a micro bevel on the board ends.

  • Texture

    Brushed
    Brushed

    Wire brushing removes the soft parts of the grain and gives the floor a subtle textured feel.

  • Construction

    3-layer construction: The softwood core is produced from spruce with standing growth rings. The grain direction of the middle layer runs perpendicular to the top and bottom layers. The bottom layer is produced from spruce

  • UFH

    Yes

  • Stair Noses

    V / P / S
    V

    Nose V (Victorian Bullnose, solid)

    Length: 1.000 mm, 1.500 mm, 2.000 mm, 2.400 mm
    Depth: 15 mm or 20 mm

    P

    Nose P (Square Nose, solid)

    Profile: Pencil round
    Length: 1.000 mm, 1.500 mm, 2.000 mm, 2.400 mm
    Depth: 15 mm or 20 mm

    S

    Nose S (Square Nose, engineered)

    Profile: Micro bevel
    Length: 1.000 mm, 1.500 mm, 2.000 mm, 2.400 mm
    Depth: 15 mm or 20 mm

Samples

Your sample bag is empty

Compare

Compare chart is empty