Specifications
See below an extract of technical specifications for Oak Super White. Please contact us anytime if you do have further questions or download the full technical sheet for more information.
-
Species
Oak -
Origin
Europe (Germany)
-
Shade
Light / White tones -
Sizes & Patterns
Boards / Herringbone / ChevronBoardsWidth: 160, 195, 245, 250, 280, 310 (mm)
Lengths: Boards up to 245mm wide in standard length of 2.0m, 2.2m and 2.4m / Boards in 250mm and wider are produced in 3.0m-4.2m
On request boards can be produced up to 5.5m longHerringbone120 x 780 (mm)
Chevron120 x 780 (mm)
Chevron angle: 55 degrees
-
Thickness
11mm (up to 195mm width), 15mm (up to 245mm width), 17mm (260mm and 300mm wide boards)
-
Wear Layer
+/- 4mm on all oak floors in 11mm, 15mm and 17mm depth
The veneers are cut so the grain/figure is in the centre of the board -
Grades
Rustic / Classic / PrimeRusticLarge and frequent knots including large filled knots become a feature of the overall look. Rustic grade allows for a wide range of variation in colour and grain. This grade may contain:
- Knots up to 80mm
- Filled knots and other imperfections
- Natural colour variation
ClassicClassic grade allows a more pronounced variation in colour and grain. The floor contains frequent knots including filled knots. This grade may contain the following:
- Knots up to 40 mm
- Filling in a sympathetic style
- Natural colour variation
PrimePrime grade has an even appearance with very few small knots. The natural variation is limited, though can be more visible on fumed oak. This grade may contain the following:
- Knots up to 10 mm
- Natural colour variation
Note the grading rules for extra wide boards are less stringent, meaning that 280mm and 310mm wide boards in prime grade can contain knots up to 20mm in diameter.
Very wide boards (260mm and 300mm) are only available in classic and rustic grade. Rustic grade boards do not contain sapwood.
-
Bevelled Edge
Boards up to 245mm width are produced with a tiny micro bevel (0.5mm). Wider boards are produced with a V-bevel on the long side and a micro bevel on the board ends.
-
Texture
BrushedBrushedWire brushing removes the soft parts of the grain and gives the floor a subtle textured feel.
-
Construction
3-layer construction: The softwood core is produced from spruce with standing growth rings. The grain direction of the middle layer runs perpendicular to the top and bottom layers. The bottom layer is produced from spruce.
-
UFH
Yes
-
Stair Noses
V / P / SVNose V (Victorian Bullnose, solid)
Length: 1000 mm, 1500 mm, 2000 mm, 2400 mm
Depth: 15 mm or 20 mmPNose P (Square Nose, solid)
Profile: Pencil round
Length: 1000 mm, 1500 mm, 2000 mm, 2400 mm
Depth: 15 mm or 20 mmSNose S (Square Nose, engineered)
Profile: Micro bevel
Length: 1000 mm, 1500 mm, 2000 mm, 2400 mm
Depth: 15 mm or 20 mm